Many people associate pruning with changing the structure of your tree to fit a different shape or style. However, this is not the case. Altering the structure of the tree is known as “Tree Training”. This is a much better way to develop an alternate form for your tree. Pruning should be used to prevent diseases, prevent lopsidedness, and encourage healthier fruit growth.

Pruning is also used to maintain the proper shape for the tree. For example, if you have an abundance of branches on one particular side of the tree, then you will use pruning to get rid of the larger segments which weigh down the tree to one side. Think about it more in terms of maintaining rather than altering. While pruning is useful occasionally, most of the time you can use training as a healthier and more efficient alternative.

Training has not been around for very long. Through tying down branches or propping them up from the ground, one can direct the growth of the tree to take whatever shape they want. This theory is usually used in the early days of the tree to encourage it to develop fully. If you direct the tree and get it started off on the right foot, you’ll save yourself a lot of pruning time later.

Usually, training occurs during the summer. Rather than just cut off all the branches that aren’t going in the right way, you try to redirect them. The mechanisms you use can be thought of as orthodontic braces for your fruit tree. They pull or push the branches, like teeth, in whatever direction you want them to go. Eventually they naturally grow that way due to your training.

It can be hard to decide how exactly to train your tree. There are many different forms and shapes to choose from. Some are meant to allow a high density of trees in one orchard, and some are meant to provide maximum fruit bearing per tree. Depending on where your tree is and how you want it to function, you will have to look for different types of forms that will perfectly fit your situation.

The theories of training can also be applied even if you are growing a tree in the traditional (natural) form. Sometimes branches will grow too close together and block each other out, so training them to grow away from each other can prevent the need to prune them later. This is highly beneficial even if you are just growing a tree in your backyard, in a non professional environment.

To train a tree, you will need some sort of outside brace to push or pull a branch. Alternately, if you want to push 2 branches closer together or further apart, you can place something in between them or lash them together with rope. Successfully training your branches just takes a little imagination in deciding what to tie things to and what to push things off of. I have found that stakes, fences, or simply an upright two by four leaning away can work wonders.

There is no tree grower that couldn’t benefit from using a little training in their tree growing escapades. Whether you have decided to give your trees a completely new form, or just optimize the branch placement for healthier fruit, there is surely some way that training can benefit you.

Having a steady supply of fresh fruit from your backyard is quite a nice thing. Many people strive to attain this dream. However, many people fail to realize how easy it is to obtain a fairly serious infestation of worms in their fruit. I can’t think of anything more unpleasant than biting into an apple off of the tree you’ve slaved over for so long, only to find that you have not been diligent enough with your pesticides.

Even though it seems like a hassle to always be spraying pesticides, it is something that you should never overlook. Spraying pesticides is a fairly quick and easy process, and you shouldn’t have to do it very often at all. Believe me; it is worth it to just get out there in the yard every couple of weeks and spray.

Spraying can seem like a time consuming process. After all, you have to go out and buy all the supplies, mix the chemicals, apply them, and clean up everything you used in the process. Sometimes you’ll even need a ladder to reach all segments of the trees. The entire process can take as long as four hours if you have several large trees. Doing this every 2 weeks can get very tiresome and irritating. However, you should always persevere. Usually being adamant in your regular spraying will help prevent infestations of such things as moths, but sometimes it’s just not enough.

Usually you can recognize of moths have laid eggs on your trees by the ends of the branches. If you notice something that looks like a cluster of moth eggs, you should immediately prune the branch you found it on and destroy it. Check the rest of the tree very thoroughly. If the eggs were to hatch, you would have a huge amount of moth larvae crawling around through your tree and into your fruits. I don’t know about you, but the very thought of this makes me wretch.

I once had a friend who was dealing with a very bad moth infestation. He couldn’t find a single fruit on his tree that didn’t have a worm inside of it. He ended up having to cut down the entire tree (the stump was a wriggling mass of white larvae. I threw up when I saw it. Damn my weak stomach!) and have the stump professionally removed to get rid of all traces. Having to start completely over on a tree you’ve worked on for so long is an absolute travesty.

I myself live in the same area as that friend I just mentioned, and I have never had a problem with moths. This is because every Saturday during springtime, I make it part of my schedule to go outside and spray down my entire tree. Preventing the infestation of unwanted guests is much better than having to cut down a tree and start completely over just because of a little laziness.

If you have not thought of spraying pesticides in the past, you should head to your local gardening supplies store today. Find out what pests are most prevalent in your area, and buy the appropriate pesticides to prevent them from ever visiting your trees. I urge you not to brush this off, as it will save you lots of trouble in the long run.

If you maintain any pitted fruit trees such as plums, peaches, or cherries, I’m sure you know that those types of trees are much more susceptible to diseases than any other type. While the fruits are delicious, it can be rather hard to live with all of the maladies that can plague the life of everyone who has ever grown one of those types of fruit trees.

The main disease that you will hear about the most is known as “Brown Rot”. This is a fungus that attaches to many of the leftover fruits after the picking season is over. Not only does it look disgusting on the leftover fruits, but it also can come back on the newer fruits, rendering them inedible (unless you enjoy eating fungus). To prevent this malady, you should prune your trees often to encourage good air circulation. Buildups of moisture are the main cause of the brown rot. Also when you are done picking for the season, you should get rid of all of the leftover fruits in the tree or on the ground.

A cytospora canker is a disgusting dark, soft area on tree branches. Gum protrudes through the bark, along with a large callus. The pathogen which causes these cankers usually enters the tree through older wounds. If you prune all of the sprouts that occur in late summer, cankers will have a harder time making themselves known within your tree. When you prune, always allow the wounds to heal naturally rather than use the wound dressings that you can buy at gardening stores. I’ve found that these usually do very little to help any situation, and only serve to make the tree look unnatural.

Those planting plum trees might deal with something called Black Knot. The symptoms of black not are rough tumors or growths that can be seen on the tree’s branches. If you see any of these, you should immediately chop off the branch it has attached to. If you use branches for mulch usually, don’t for this one. This disease can easily re-enter the tree if it is within a certain distance.

Almost everyone who has ever maintained a cherry tree has dealt with the “Cherry Leaf Spot”. It usually shows itself when there are old dead leaves accumulated on the ground. Preventing this disease is fairly easy. All you have to do is be fairly diligent in raking up all of the leaves that fall from your tree. If you have already seen signs of the disease, you should destroy all of your raked leaves. If not, then you can use them as mulch.

When your fruits ripen and become ready for picking, you should always be completely finished with picking within 2 weeks. It is best to daily go outside and pick all of the new ripe fruits, along with any that have fallen off of the tree or are starting to rot on the tree. By doing this, you will prevent bees and wasps from becoming too dependent on your tree for nourishment.

Growers of fruit trees are constantly faced with diseases and pests to worry about. However, if you take the proper precautions then you can avoid most of them. You should also look for any diseases that have been affecting your local area, and try to take steps to prevent those as well.

If you want to protect your fruit tree from pests during the summer, this is almost impossible to accomplish without the use of pesticides or chemicals. This might scare some people into thinking that the actual fruits will contain traces of the chemicals. If you do things correctly, you can get rid of all the pests and not infect the actual tree. If you’re going to be spraying chemicals, you most likely will be using either a handheld pump or a hose-end sprayer.

If you’re using the pump sprayers, you will be able to more accurately determine the mixing of the chemicals. Unfortunately, you won’t be able to spray it very far. Usually it won’t reach the tops of trees. This can be achieved with the hose end sprayers, but getting the correct mix of chemicals is quite a challenge. It all depends on your water pressure to get the correct mixture of chemicals, but water pressure is not constant. One day it might be lower, in which case your chemical content would be higher. The types of materials you buy for hose application are generally in an extremely strong form. They need to be severely diluted before they are weak enough to apply.

When you are mixing the chemicals for spraying, you need to follow the directions exactly. You are dealing with dangerous chemicals, so its best to do exactly what the professionals recommend and wear the proper protective gear. When you’re dealing with chemicals like this, you should always wear rubber gloves. Use the exact portions indicated on the label. Estimation won’t work in this case, and you could end up killing your tree or not killing any bugs. You should usually start by putting in the proper amount of pesticide, and then top it off with all the water.

Now comes the spraying. The goal is to spray the same amount over all the areas. You still don’t want to spray so much that enough builds up to drip off of the leaves. Usually you will want to get a ladder so that you can get within spraying distance of all the portions of the tree. Apply the pesticide in even, full sweeps as to hit every piece. Never go over the same part twice, because that is when you start to drip.

If you’re dealing with a large and well developed tree, you should stand on a ladder under the base of the trunk. Spray all segments from the inside towards the outside. After you are done spraying the outer canopy, you’re ready to get out from under there and work on the rest. Once you are done cleaning, be sure to fully and thoroughly clean off every bit of equipment you used, including your clothes. Don’t include the clothes you wore while spraying in the rest of your family’s laundry.

While you’re spraying for pests, the main thing to keep in mind is to avoid dripping onto the ground. When this happens, the pesticides will be absorbed by the roots of the tree and be transported to the actual fruits on the trees. As long as the pesticides stay on the outside and you wash your fruit thoroughly before you eat it, you will have nothing to worry about as far as being poisoned goes.

If you have a problem with birds, you have probably tried many solutions. Some of the most popular include plastic animals, scarecrows, wind chimes, or highly reflective tape. All of these things can do a great job of reducing bird problems. I have quite a few cherry trees in my backyard, and I used to struggle a lot with birds. After I applied all of these solutions, my problem went almost completely away. Unfortunately, the solution only lasted a few months.

Apparently, birds have a natural tendency to get bolder as time goes by. While at first my scarecrow scared them senseless, now I look outside and see them sitting on his shoulder. And munching on cherries from my tree. Those insolent little fiends! I’m not saying I mind birds. I love having them around my yard. But you see, I’ve already designated one tree specifically for allowing birds to eat off of. But it seems that birds can’t be content with what they’re given. They always feel the need to go over to my own trees when there is a tree just for them that doesn’t have any scary things around it.

I saw many gardening stores marketing a type of bird netting. I decided to use it. Bird netting is basically a giant net that you throw over the entire tree. The holes are about one half of an inch wide. I purchased enough of this to cover one whole tree. It was quite a hassle to install, but it definitely worked after that. I didn’t have any more problems with birds taking cherries from that tree. But one day I woke up and made my daily rounds. On that day, I found 2 birds caught in the netting that had been choked to death. I felt absolutely terrible. I buried the birds and immediately took down that netting. I didn’t want to protect my tree at the cost of the birds’ lives! Sure, I’ll kill off a few bugs, but birds are a little too nice for me.

For a while I felt too guilty to prevent the birds from eating any more. I thought that I would make it up to them by letting them feast on my cherries. I even took down my scarecrow. But a few months later I saw something in a fabric store that made me rethink my generosity. Almost every fabric store sells a material called “tulle”. It is very fine netting with holes too small for any bird to fit its beak or head into. While it is easy to find, it is also extremely cheap. Buying enough to cover one tree ended up costing less than half of what it cost for the lethal bird netting.

I installed the tulle onto my tree (I’ll admit it was a lot harder to install than the bird netting was. I had to attach several large pieces together at the seams) and watched it for a day. I wanted to keep an eye on it every second, so that if a bird got caught I could quickly help it out. Fortunately, no bird ever got caught. Tulle is a much safer and cheaper alternative to bird netting, and I suggest it if you have any problems with birds. Just remember to let them have at least one tree for themselves! Sharing with birds is an essential part of being a good gardener.

When a tree is in the young stages, one of the most vital things you need to provide for it in addition to water and nutrients is support. If you don’t hold up the tree somehow, it might end up bending in a certain direction and growing extremely crooked for the rest of its life. So no matter what, you should always have some kind of support.

The most popular method of keeping young trees upright is to put long stakes into the ground on either side, and tie loops around the tree. Each loop should be fairly loose to allow for further expanding of the trunk. Lots of people just have a stake on one side of the tree, but this is not a good practice because it generally doesn’t allow for further growth of the tree.

You should only be staking your tree if you think that wind and other forces might be literally moving the ball of roots within the ground. Your staking should prevent all of this movement, because this is the most harmful thing that can happen to a young tree. It causes the roots to be in motion too much and not be able to properly get a hold on the soil so that the tree can develop normally.

Before you stake a tree, you should be completely sure that it needs it. If you constrict the movement and growth of a tree that doesn’t need to be tethered down, you could harm it beyond repair. For example, the staking mechanism you use could cause abrasion or “rashes” on the trunk. This will happen anyways, but why have it happen needlessly? Also, staking gives your yard an unnatural look and can present a hazard for people walking or running across the yard.

The staking process is actually rather simple. Just take 3 stakes and tie each one separately near the base of the trunk. If you use some sort of tether to prevent rope burn on your tree, that would be an even better solution. These can be purchased at any gardening shop, and are designed to be friendly to the bark of the tree. It is much better to stick with these instead of bare rope, to minimize the amount of friction the tree endures.

When you think your tree has been staked long enough to stand on its own, you should remove the stakes from the ground as soon as humanly possible. Every moment the tree is constricted it is losing some of its vitality. As soon as it seems like the wind is dying down around your area, look on the weather reports and see how much wind is forecasted. If the skies will be pretty clear for a while, you should at least temporarily take off the stakes.

To wrap it all up, you should never deny your tree a good staking. It is a completely necessary thing to do in certain situations. It is very crucial to understand when those occasions are, though. Staking a tree that doesn’t need it can be as damaging as not staking a tree that does need it. It might be beneficial for you to consult an expert, and get their opinion as to whether your tree should be staked, and for how long.

If you live in an area that is slightly parched of water, you know better than anyone that one of the things that decides whether a tree survives or not is your ability to supply it with sufficient water. Unfortunately, many people don’t take this in to account when buying a tree. They will just go for the nicest looking tree, and then wish they could give it more water. If you do a little planning before you rush out and buy a tree, you should be able to find trees that can survive on lower amounts of water.

Usually the most adaptable plants are the ones that are indigenous anyways. If you live in a zone that is suffering a water crisis, usually the only plants that survive are the ones that have been there all along. This is because they are used to the conditions and know how to survive. Just take a drive through the undeveloped regions of your city, and look at what trees are green. Find out their names, and buy them. They might not be the most attractive trees, but you rarely have to make any modifications to your soil to get them to grow.

One of the trees that will grow almost anywhere without using much water is the “Scotch Pine”. Not only does it grow at a very fast rate of 20 or more inches per year, it is hardy and drought tolerant. It usually grows between 25 and 35 feet, and it extremely easy to get started. Most nurseries sell these trees, especially in areas with lower amounts of water. There are many varieties available. Many fade to a yellowish brown color during the colder months, and this is usually what causes some people to dislike them and others to love them. However, there are varieties available that do not do this.

The Rocky Mountain Juniper is an extremely hardy and easy to grow tree. Its bark also turns a browner color during the winter, and rejuvenates in late spring. They are frequently used as windbreaks because of how tough they are. These trees are also great if you are trying to attract different varieties of birds to your yard. They provide great branches to nest in. Unfortunately the Rocky Mountain Juniper doesn’t grow as fast as other hardy plants like it. The rate is less than 10 inches per year.

Another one of the most popular drought resistant trees is the Russian Olive. This tree is impressive and will definitely turn some heads once it is fully grown. It is more decorative than the trees mentioned above, and will reach 20 or 25 feet once it is fully grown. They are able to grow in almost any soil, and attract birds with the berries they produce.

As you can see, there are many options for you if your water is limited. There are many others that I have not mentioned, and depending on your area you may be able to find a preferable variety. Do a Google search for hardy plants that will survive in your area, and you should be presented with a large list. If you can’t find that list, just go outside and see what is currently flourishing. That is the best indication of what you should buy.

If you are currently trying to plant trees in order to shade your garden, you will probably want something that grows very fast and provides plenty of shade. With the many types of trees available, you will have no problem finding a variety that will grow extremely fast and provide all the shade that your garden needs to survive. There are also many things you can do to speed up the growth of trees.

Generally trees are separated into two categories: long lived and short lived. If you are just looking for some temporary shade for your garden, you should stick to a short lived tree. But if you plan on keeping it for years, go for a long lived tree.

If you decide on a short lived plant, you are probably looking for something with speedy growth. This means the root system will be particularly aggressive, so be sure not to place it near any septic tanks or other deep rooted plants. If the roots have plenty of area to grow, then they will shoot out extremely fast and your tree will take off in growth. Your placement should also be based on the tree’s relative position to the area you are wanting to shade. You should keep it to the western or southern sides for maximum shading.

Preparing your soil well for the shade trees can be the best way to enhance the plant growth speed. The bigger hole you dig for the root ball, the better. Also when you dig out the soil from the hole, you should work it over well before you replace it. This will allow the roots to penetrate through the soil better. If you mix in all your fertilizer and nutrients to the soil before you replace it, you will end up with a superior tree. Also try to use organic materials as mulch. Bark and any branches or twigs work well for this, and will encourage the quick growth.

When you buy your shade tree, it will usually come with the root ball balled up and in a burlap bag. It might also be grown in a container or simply with bare roots. If you get a tree in a burlap bag, you should plant it anywhere between fall and early spring. Trees grown in containers are ok to plant at almost any time of the year. If the tree just has bare roots, then the ideal planting time is anytime in winter and early spring. If you buy a tree that has been grown in a container, make sure that the roots are not constricted by the container. This will usually cause the roots to go in circles underground after you plant it. After you buy the tree and before you plant it, be sure to constantly add moisture to it.

The ideal planting process would include putting it in the ground at the proper depth, and replacing the soil without compressing it too much. Immediately after planting, you should give the tree its first watering before putting the layer of mulch on. You should always use organic mulch, and have a 2 or 3 inch layer of it at the base of your tree.

You should always use nitrogen fertilizer during the first segment of the tree’s life. Simply follow the instructions on the label in order to find out exactly how much to apply and when to apply it. Never apply too much fertilizer while the tree is young. You should usually wait until it has been established for about a year. The fertilizer that you do add should be sufficiently watered down.

If you are trying to grow a tree speedily, there are many more things that you need to consider. However, with proper planning you can create the perfect environment for the tree to spring right up and provide you with plenty of shade within months.

Sometimes a tree gets to the point where it is necessary to say goodbye to it. It can be a painful choice to make, but sometimes the tree gets too close to the house, gets too diseased, gets an incurable infestation of some pest, or grows too tall and gets close to a power line. If any of these things occur, its best to do the right thing and get rid of the tree. Although you might have spent hours and hours getting the tree to where it is today, it is almost dishonorable to the tree to allow it to suffer in bad conditions.

Once you have made the choice to remove the tree, you need to plan its removal. I can’t begin to count how many windows I’ve seen knocked out or cars I’ve seen crushed because of poor planning in the tree removal process. Decide what direction you want it to fall, and accurately measure to make sure it will fall completely clear of anything else that it could possibly cause damage to.

Once you have the falling direction planned out, you should climb up the tree and tie two long ropes near the top. Anchor them on the opposite side of the one that you want it to fall towards. This will allow you to adjust the direction the tree is being lowered in, just in case it starts leaning towards anything it could destroy.

Now that you’ve taken all the necessary precautions, you are ready to begin chopping. If you plan on using a manually operated saw or axe, please step back and consider how insane that is. Chopping down a tree by hand will take you forever, and will not even begin to be as accurate as using a chainsaw. If you don’t have a chainsaw, you shouldn’t even consider doing it without one. Ask around with your neighbors and see if anyone has one that you could borrow. If that doesn’t work, rent or buy one from your local home improvement store.

Before you start chopping away at the tree, you should wear proper eye and face protection in case any wood chips fly towards your eyes. I had a friend who blinded his right eye while cutting down a tree, so I hope all of my readers do not make the same mistake as he did. Whenever you operate a power tool, always be sure to wear proper protection for any exposed parts of your body.

When making the cut, you do not want to just cut a straight line into the tree. It is best to cut a sideways “V” into the tree. This is because if you cut the straight line, the tree will end up rolling to one side or the other. If you cut in a “V”, the tree will be able to fall in the exact direction that you want it to fall. Occasionally it might be a few feet off due to human error during the cutting process, but if you have some strong friends pull on the ropes you tied, you can line it back up with the path you wanted it to take. The entire process shouldn’t take more than an hour.

Removal of the stump can be slightly more difficult. You have several choices; you can rent out a stump chipper that will completely destroy the visible section of the stump. Or you can spend countless hours digging it out. Digging out the stump is much more thorough, but takes forever. If you have kids this shouldn’t be a problem. Kids often find the thought of digging fun, and are excited to go outside and dig all day long with their friends. This was the method I used, and I had the entire stump out within a week. Keep in mind that my stump was about 1 foot in diameter, and digging probably won’t work for stumps much larger than that.

One of the most frustrating things that can possibly happen to someone who has slaved for hours and hours in growing a fruit tree is the unexplainable barrenness that can sometimes occur when there should be a plethora of fresh fruit. I know this from experience. My neighbors all consider me the gardening guru because of my extensive knowledge. But this is only because gardening has been my passion for years and years, and like a sponge I have accumulated so much information in my mind. My learning has also come from past experiences with failure. For about 5 years after I started planting fruit trees, I did not see a single fruit for all my labor. I was nearly ready to give up, until I met who I think is truly the guru of gardening.

I was in the gardening store, looking for some sort of new fertilizer to put my hope in for my quest to obtain fruit. I don’t know if there was a look of desperation in my eyes, but a kindly old man came up and started speaking with me. He introduced himself as Ralph, and for some reason I opened up to him and told him about all of my difficulties. I’ve never been the type to spill all my problems on anyone who asks, but Ralph seemed like such a nice fellow that I just couldn’t help it. And I’m glad I did, because what he taught me truly helped me to get my fruit trees in gear and start producing.

I learned that generally, the inability to produce can be caused by a number of factors. Sometimes the tree is simply too young; If your tree is less than four years old, you shouldn’t exactly expect it to be producing yet. If it has reached 4 years and you still have seen no sign of fruit, then you should start to consider other factors that might be causing the barrenness.

If the tree is undergoing any type of water stress (this can be poor drainage, too much water, or too little water), then it will have trouble growing. If you suspect this is the case, you should evaluate your own watering techniques and compare them with the needs of the tree to see if you are causing water stress. Also always be on the lookout for any diseases or pest damages. If your tree is constantly being molested by all kinds of little creatures, then you can’t expect it to be lively enough to produce fruit.

If your tree blooms but still doesn’t produce any fruit, this could be because of cold temperatures during the bloom. The coldness damaged the flower bud or damaged the baby fruit. Aesthetically the tree may look fine, but the inside could be damaged beyond any hope of ever seeing fruit. Unfortunately there isn’t much you can do in this case except for wait until next year and hope that it doesn’t happen again.

If the tree’s pollination process has not been fully completed, it could have troubles growing fruit. If you planted different varieties, you may find that the requirements are different than you had originally thought and they were incompatible. In this case you need to replant the correct combinations.

Once I evaluated the conditions of my tree and everything that has occurred in its life, I realized that not only had I cross pollinated slightly incorrectly, but I was also giving my tree too much water. After I fixed these problems, I had learned my lesson and I have not had any trouble bearing fruit since then.

So if you are struggling with a plant that is not being cooperative, you should consult an expert gardener. If you can find a gardening mentor like mine that is willing to teach you everything they know, then you should be able to get your garden on the right track with no problems.